Back in October I wrote about doing a “fireside chat” (there was no fire, but there was talk about creating one…) about the release of Common OpenStack Deployments where I sat with Rob Markovich to chat about the book.
I’m thrilled to say that the video for that chat, lasting just over 11 minutes, has now been made available:
As a refresher, more photos from the event are available on the meetup page here.
We’ve been quite busy since I last checked in during November, following the OpenStack Summit for Ocata.
Unpublished as of my last post here, at the Ocata Summit I sat down with Lisa-Marie Namphy for an eight minute chat about the strides made by the OpenStack Infrastructure team in the recent Newton cycle, including doubling of test capacity. Conversation wrapped up by talking about the book, which she had me sign at the end of the interview. The full video is online here: OpenStack® Project Infra: Elizabeth K. Joseph shares how test capacity doubled in Newton
After my last post, I also sat down and wrote a bit about what I worked on at the Ocata Summit with the rest of the OpenStack Infrastucture team at OpenStack book and Infra team at the Ocata Summit.
On November 4th an overview of the book was written by James Gray of Linux Journal Elizabeth K. Joseph and Matt Fischer’s Common OpenStack Deployments. Huge thanks to Jay for taking the time to write about it.
November 14th marked the release of Linux Luddites Episode #91, where I spoke with the cast at length about what OpenStack was, and the basic history and rationale behind the project. I went on to explain how the book broke down the complicated concepts and components into a simpler introduction to OpenStack through a series of real-world examples using the open source Puppet modules. I had previously spoken to the crew about Xubuntu, so it was a lot of fun to rejoin them to talk about OpenStack.
Later in November, Matt has published a couple blog posts related to Keystone that bring to the forefront some of the features in the Ocata release:
Note: The book covers the Mitaka release and modules won’t be updated to Ocata. We’ll look at updating beyond Mitaka if we do a second edition.
Come December, I attended OpenStack Days Mountain West and gave a talk on the OpenStack project continuous integration system, along with updated statistics from the Newton Cycle. Surprisingly I’d been so focused on OpenStack Summits and general open source events, his was the first OpenStack Days event I ever attended. I wrote about my experience here: OpenStack Days Mountain West 2016
In January I started working at Mesosphere as I work my way up the stack to focus more on containers an application orchestration. In February I met with my new team and we had a meetup where we talked about DC/OS, K8s, OpenStack. For my part, I covered the positioning of OpenStack related to both Kubernetes and DC/OS, and how they can be used in collaboration with each other.
A recording of the panel is available at DC/OS meetup: Meet the OSS Team!
We also recently started having more feedback from the book trickle in. We love hearing from readers, even if it’s filing an issue on GitHub if they’ve encountered while sampling a deployment. If you’ve bought the book, also do consider doing us a huge favor and placing an informative review on Amazon.
A few weeks ago the OpenStack Summit in Barcelona took place. This also gave me the chance to catch up with my contributing author, Matthew Fischer, for the first time since the release of the book!
At the summit I also brought along 10 copies of the book, thanks to my publisher, to give away at the Women of OpenStack speed mentoring event on Tuesday morning. I sat down the night before in the Women of OpenStack section of the expo hall. Huge thanks to Nithya Ruff for organizing this and being so supportive in making sure the books got to women who were interested in having them.
I participated in various sessions at the summit related to the OpenStack project infrastructure, but the highlight of this work was getting to demonstrate some of our multi-cloud tooling in front of the biggest audience we’ve ever had, from the keynote stage!
For the keynote, I joined Executive Director Jonathan Bryce on stage to walk the audience through the basics of the continuous integration system for testing of OpenStack patches, some of the latest statistics of how many jobs are run (over 2k per hour) and how multiple cloud providers donate resources to the infrastructure. We then demonstrated removing one of the providers and adding three new providers to increase the number of instances in Europe.
Thanks to Johanna Koester for taking this picture (source)
The full video of the demonstration is on YouTube: Demoing the World’s Largest Multi-Cloud CI Application
It was a great summit, we’re looking forward to the next one in Boston!
As October kicked off, I was off to the Ohio LinuxFest to give a very well-attended A Tour of OpenStack Deployment Scenarios where I walked the audience through various types of ways OpenStack can be used, just like the book does.
Following my talk, I gave away copies of my book to folks who were active on social media (thanks again Vitaliy, Svetlana and Jon) and took time at the event to sign copies.
I was delighted to also see the book, and my talk, featured prominently on the banner my employer sent along.
Back home on the west coast, I was invited down by meetup organizer Lisa-Marie Namphy for the October 13th San Francisco Bay Area OpenStack meetup to do a freside chat with co-organizer Rob Markovich of Moogsoft.
The first half of the meetup was spent chatting with fellow attendees and having some food. At 7PM I sat down with Rob to answer some questions about the book and some of my thoughts on OpenStack and the maturity of configuration management around it.
As the chat concluded, I had five books to sign and raffle off.
Thanks to Lisa for taking pictures during the event. More photos from the event by her and others can be found on the meetup page, here.
Talks on the topic of monitoring OpenStack by Conor Beverland of Wavefront and Richard Whitehead of Moogsoft made up the rest of this monitoring-focused meetup. I’m really thrilled to have been part of this event.
Tomorrow morning I’m flying to Barcelona for the OpenStack Summit. I’m bringing along 10 books to this event, along with some discount codes for folks who are interested in purchasing it. If there ends up being a formal signing I’ll be sure to share an update here.
Figuring out how to dedicate this book took some doing. Do I dedicate it to a loved one? Or perhaps the OpenStack Infrastructure team that has shown me so much support over the years?
I ended up dedicating it to the OpenStack Community as a whole, with a special nod to the OpenStack Puppet team.
Text:
This book is dedicated to the OpenStack community. Of the community, I’d also like to specifically call out the help and support received from the Puppet OpenStack Team, whose work directly laid the foundation for the deployment scenarios in this book.
I learned while crafting this dedication that it wasn’t just one team in OpenStack that made me feel welcome. As I’ve made my journey through open source over the past decade and a half I’ve learned a lot about communities, values and inclusiveness. The OpenStack community is really something special.
And in addition to laying the groundwork for the book, the Puppet team is also a wonderful group of people. They’re this amazing operator-heavy team who came together to openly support the tooling they’re all using internally. Since all the deployment scenarios in the book are driven by these upstream Puppet modules, it’s no exaggeration to say that the book wouldn’t exist without all of their work.
A couple names on the cover of a book tells you very little about how many people have contributed. The book has an Acknowledgments page, but I figured it would be a bit more public about how grateful I am for their participation in making this book happen.
I always knew I wanted to work with someone on this book. Early on in my work, I found a few people who offered guidance and did some very early reviews of my first chapters, including Ola Peters, Joe Gordon, Eric Windisch and Christian Berendt. Unfortunately these busy, accomplished people weren’t able to join me in the by-line for the book, so I continued my search!
At the OpenStack Summit in Vancouver for Liberty I finally found my contributing author, Matt Fischer. We had known each other through work in the Ubuntu community but first met to seriously discuss his involvement at that summit. The book truly wouldn’t have such functional deployment scenarios without his enterprise-level expertise with OpenStack. He was also able to reach out to his colleagues Clayton O’Neill, Eric Peterson and Adam Vinsh in areas where they were able to lend their expertise, including Puppet, Horizon and Swift.
I had already been going in the direction of using Puppet for all the deployment scenarios, but given Matt’s experience and the exceptional OpenStack Puppet team, I was ready to go full in with the Puppet-driven book. The OpenStack Puppet project team lead Emilien Macchi helped out with some of our examples, and OpenStack Puppet core Colleen Murphy did a considerable amount of work testing and debugging all the scenarios with us.
There were then subject matter experts. Mike Perez helped with the chapter about Cinder block storage. I had Gordon Chung to work with on Ceilometer metering. John Dickinson of Swift put me in touch with Donagh McCabe, Matthew Oliver, Hisashi Osanai, Christian Schwede and Kota Tsuyuzaki, all of whom had an impact on improving the Swift object storage chapter. After Devananda van der Veen prophetically convinced me to include an Ironic bare metal chapter, Julia Kreger stepped up to review and even did a lengthy video call with me to walk me through how everything fit together. Charlie Crawford chipped in by offering some tips about containers and reviewing that chapter from outside the OpenStack world. I was also fortunate to be local to James Downs, whose networking expertise helped with review of the networking chapter with a focus on OpenStack, and took the time to go over a pile of network diagrams over beer one evening.
There were also some folks I brought in from outside the OpenStack space. My sysadmin friends Jonathan DeMasi and Brent Saner offered their systems perspective, which was very valuable since they are the target audience for the book. They helped make sure the book didn’t make too many assumptions about the cloud-specific expertise of the reader and explained all the concepts clearly. Web developer Pasi Lallinaho, who I work with on the Xubuntu project, also played a role, helping make the HTML pages I serve up in the deployment scenarios are much prettier than I came up with myself.
I also had four people who reviewed the whole book, José Antonio Rey, Mohammed Arafa, Doug Hellman and Chris Zahn. José dutifully tested every single scenario in the book and worked with me when he had trouble with the environment. Mohammed kept me on my toes with clarity and consistency edits, along with offering advice from his own experience with OpenStack. Doug brought his incredible knowledge of OpenStack, the OpenStack community and expertise as a writer to the table as he not only reviewed the book, but gave me the confidence that I was writing something that would be valuable. Chris was my technical editor from Prentice Hall who cleaned up grammar (I seem to have a problem with “that” and “which”) and made sure everything flowed as a clear journey for the reader through the book.
My editor Debra Williams Cauley has been exceptional. We spent almost two years working together on this book and she offered advice, guidance and support throughout. Some parts were really tough to get through, but she made sure we made it to the other side.
My journey in OpenStack would have never been successful without the OpenStack Infrastructure Team, a group of brilliant people who I get to work with every day. My role on this team made me feel comfortable with OpenStack and their support through all my projects on the team has never wavered. I routinely feel honored to count myself as a member of the team that keeps the OpenStack project Infrastructure running well from release to release.
Finally, I had a lot of support from friends and family through this. My co-author on the two editions of The Official Ubuntu Book I’ve worked on, Matthew Helmke, was always ready with a kind word of encouragement or a quick call when I ran into road blocks. My husband Mike Joseph was incredibly supportive throughout, even when I got grumpy or thought I couldn’t finish. He even bought a copy, even though I have a whole pile of them!
A great deal of work is now behind us and copies of Common OpenStack Deployments just started shipping to the folks who pre-ordered. This seemed to be a good time to reflect upon how the book came to be.
In 2014 I had just completed work on my first book, the 8th edition of The Official Ubuntu Book (the 9th edition came out this past July) with Matthew Helmke. Upon getting the finalized biographical blurbs in, my editor Debra noticed something: I work on OpenStack as my day job.
They’d been looking for authors for an OpenStack book so she asked me if I’d be interested. In May, Debra and I finally met and had a lovely lunch at The Slanted Door, overlooking the beautiful San Francisco bay to discuss the potential and decided to move forward.
At this point I’d been working on the OpenStack Infrastructure team for about a year and a half. The team runs all the development infrastructure for the OpenStack project, as well as the whole continuous integration system where tests are run. We’re largely a consumer of OpenStack clouds, pointing our Devstack Gate tooling (and now, Nodepool) at a series of cloud providers. In my role on the team I learned a lot about OpenStack very quickly by debugging test failures with developers and working with teams to get integration testing going. Of particular note, in 2013 I had spent a chunk of time looking into possibilities for bare metal testing. Then I spent several months latched on to the TripleO team to assist with getting their testing infrastructure going, which had me spinning up multiple instances of OpenStack per day in my local testing environment. This work made me very familiar with how bits of OpenStack were stitched together through what was then a series of bash and Python scripts used to deploy it. In September of 2013 I was familiar enough with OpenStack to give a day long workshop for CodeChix in Silicon Valley, which I wrote about here.
With this firm footing in OpenStack I started brainstorming what I’d like to see from a book about it. Where are the gaps in existing books? Where are the gaps in what people understand about OpenStack? So I started asking people at conferences what they thought of or knew about OpenStack. As I gave talks about systems administration and our open source approach to operations in the OpenStack Infrastructure team, I answered questions people had about OpenStack. I noticed two key trends:
To address the first, I realized that OpenStack is pretty overwhelming at first glance. It’s made up of dozens of projects (arguably hundreds, depending on how you count). Each of these projects is hyper focused on accomplishing the task at hand in order to serve the demands of their users. They’re eternally seeking to improve stability, preserve backwards comparability and add features. These are all great goals, but it’s easy to lose sight of the big picture and their place in the OpenStack ecosystem. Valuable books had started coming out to tackle specific components of OpenStack and teams are very excited about speaking on their particular piece of it. It turned out, very few teams were focused on presenting the OpenStack project as a whole. This made it difficult for newcomers to get a good sense of the big picture too. I found that OpenStack was routinely confused with other cloud and virtualization technologies, and confused with other projects that start with “Open” in the name, particularly among technologists who aren’t focused on open source.
How could I help fix this? I wanted a book that would give real world examples that people could relate to. The book begins with a few chapters of introduction to OpenStack, some hit-the-ground-running test tooling (DevStack), a manual installation to understand the pieces that go into OpenStack and key concepts like Networking. Each chapter covering deployment scenarios then starts off by setting the stage for what you’re building and gives examples of the kinds of organizations using it. In Chapter 7, “Public Compute Cloud” we talk about a web hosting company using OpenStack to expand their hosting offerings. In Chapter 8, “Block Storage Cloud” we talk about a film company who is using OpenStack to do a significant amount of data processing. For Chapter 10, “Bare Metal Provisioning” we talk about how a company may want to leverage OpenStack to run their fleet of bare metal systems running databases. By providing these profiles, readers can start making connections to the needs in their own organization.
Once the reader is familiar with how OpenStack may be valuable to them, I wanted to demonstrate a real world way to deploy OpenStack. Instead of playing around with something like DevStack or TryStack, or by using a manual install with local virtualization tooling like Vagrant, I wanted them to experience the actual configuration management tooling that is used in the industry. This is where my fantastic contributing author, Matt Fischer, came in. We’ve worked together on Ubuntu and now are crossing paths again in the world of OpenStack. His expertise is in deploying enterprise-grade OpenStack clouds for a major cable company and routinely gives talks around the world on their strategies for deployment of services and how they’ve used Puppet in their organization. Learn more about Matt’s work on the author bio page.
With my expertise in some of the OpenStack internals and broad knowledge of various projects that we interact with on the Infrastructure team paired with his extensive real world experience deploying OpenStack with Puppet we made a great team. At the same time, on the Infrastructure team we had just started work on Infra Cloud, transitioning from being consumers to running our own, Puppet-driven, OpenStack cloud hosted on servers at HPE. Over this past year I’ve worked with Matt and with my Infrastructure team colleagues to build up expertise in using these Puppet modules and subsequently create, test and explain the deployment scenarios now found in the book.
As I barrel in on completing my fourth year working on OpenStack, I’m really proud of the work we’ve put into this book and the result. We hope you are too.
As reported back in June, the finished manuscript for Common OpenStack Deployments was turned in a couple months ago. Throughout July I spent time working with the publisher to review a couple rounds of digital proofs. During this time I also was able to review all the finalized diagrams the publisher had created from what I had hand drawn throughout the book.
In mid-August we got news that the book had been sent to the printer! Today if you head over to the book product page you’ll notice a release date of September 9th. Exact printing dates vary as the day approaches, but there’s a great chance that our books will start leaving the printer next week.
Exciting times! We’ll be posting updates as to where you can meet up with Matt and myself to get your hands on signed copies over the next few months.
I’m happy to report that on June 3rd the final draft of the book manuscript was turned over to Pearson so we could move into production. We had a great team of reviewers helping us get to the finish line here and meet these final deadlines, so I’m incredibly thankful for their work on the final days. Once I receive them, the last bit of active work that needs to be done is going through the figures that the artist at Pearson is drawing up from the line art I created.
From here I’ll be working from a schedule set by the publisher to handle design, composition, proofreading, and indexing. This work goes on through August, presenting us with a projected print date of September 2nd.
The book is also available now for pre-order directly from the publisher, as both a printed book, eBook and a bundle with both: Informit: Common OpenStack Deployments: Real-World Examples for Systems Administrators and Engineers.
As a fast-paced, large infrastructure project, OpenStack has proven to be a fascinating and sometimes tricky topic to write a book on, but as contributing author Matt Fischer writes here, we’re in the home stretch! Our fleet of subject matter and generalist reviewers have been hard at work providing feedback. Over the next week we’ll be turning in the final chapters.
We’re also delighted to share that an ISBN has been issued and the book is on Amazon and available for for pre-ordering on Amazon. We also anticipate direct pre-ordering to be available soon from the publisher, where you’ll also be able to get deals on the digital and book bundles and more. We expect publishing to happen in late August or early September.